Circutor CVM96 Series Manuel d'utilisateur télécharger pdf (Page 44)

----- Supply network analyzer CVM 96 ---------- ------- Page No. 43

- If NO is chosen, pressing " " following options successively appear:

- n PER : Peripheral No. 001 to 255

- Baud 1 : baud rate 1.200 – 2.400 – 4.800 – 9.600 – 19.200

- Parity : No, even, odd

- LEN : (length) 8 bits

- Stop bits : 1 or 2

c.- SETUP LOCKING OR UNLOCKING

SET

Unlo

 Loc (locked SETUP) or Unloc (unlocked SETUP)

Use the key "max" to modify the choice.

- Whether LOC is set, when the SETUP is accessed, configuration parameters can

be visualized but cannot be modified.

- To modify the previously set option, a 4-figure password is required to be

entered (in case that this password is not correct, this blinks and the previous

menu is again accessed).

PASSWORD : 1234

To exit this SETUP mode, the key RESET can be pressed at any moment

(WARNING: whether the SETUP is exited by pressing the key RESET some last

modification might not be saved in memory) or reach the end of this SETUP mode.

1 2 ... 39 40 41 42 43 44

Pas de commentaire

Circutor CVM96 Series Manuel d'utilisateur Page 44