Circutor CVM-C5 Series Manuel d'utilisateur télécharger pdf (Page 29)

If the value entered is greater than the maximum programming value, the digits ash for 2

seconds and the programmed value is deleted.

Maximum programming value: 9.999.

Minimum programming value: 0.

4�6�10� Maximum demand variable

On this screen the variables to integrate into the Maximum

Demand concept are selected.

The display shows the digits that identify that code for the

variable to be integrated according to Table 10

Table 10: Codes for maximum demand variables

Parameter Code

Active three-phase power 16

Apparent three-phase power 34

Three-phase current 36

None 00

The key jumps between the different options.

To validate the information and go to the next programming step, press .

4�6�11� Period of maximum demand integration

On this screen the maximum demand integration period is

programmed.

To enter or modify the integration period value, press the

key

repeatedly, increasing the value of the ashing digit.

When the on-screen value is that desired, press the

key to

go to the next digit to modify the other values.

If you press the key after changing the last digit, it will jump back to the rst digit so you

can modify the previously programmed values again.

The integration period may range from 1 to 60 minutes.

To validate the information and go to the next programming step, press .

If the value entered is greater than the maximum programming value, the digits ash for 2

seconds and the programmed value is deleted.

Instruction Manual

CVM-C5

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 39 40

Pas de commentaire

Circutor CVM-C5 Series Manuel d'utilisateur Page 29