Circutor DHB Series Manuel d'utilisateur télécharger pdf (Page 8)

Fig. 3. Overall Dimensions

Fig. 2. Meter Fixing

4. INSTALLATION

The meter has separable strips with screw terminals, what enables the

connection of external wires of 1.5 mm

cross-section for input signals

and 2.5 mm

for other signals.

One must prepare a hole of 92

+0,6

´ 45

+0,6

mm in the panel, which the

thickness should not exceed 6 mm.

The meter must be introduced from the panel front with disconnected

supply voltage. Before the insertion into the panel, one must check the

correct placement of the seal. After the insertion into the hole, fix the

meter by means of clamps (fig. 2).

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 57 58

Pas de commentaire

Circutor DHB Series Manuel d'utilisateur Page 8