Circutor CVMk2 Series Manuel d'utilisateur télécharger pdf (Page 73)

CVM

CONFIGURATION

4.7.7 - PROFIBUS COMMUNICATIONS CARD

Read Section 4.7.0., Inserting

Expansion Cards.

4.7.7.1. Probus card conguration

This card has no paramenters to congure. Only the peripheral number (Slave ID) explained

in chapter 4.7.7.3

Going into conguration menu only will appear: CARD. OK or CARD NOK.

To access the conguration of the card of probus protocol, enter the conguration menu (menu

---> setup.). in the EXP. CARD menu, select the position where the card is inserted. Press SET to

enter in the card menu.

4.7.7.2. Card parameters

To visualize the parameters that CVMk2 shows refering to the probus communications card,

you have to go to the cards menu:

MENU --> EXP. CARD --> CARD X*.

(*) Value 1, 2 or 3, depending on the card position.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 151 152

Pas de commentaire

Circutor CVMk2 Series Manuel d'utilisateur Page 73