Circutor CVMk2 Series Manuel d'utilisateur télécharger pdf (Page 85)

CVM

DISPLAY

Maximums: (F2) This displays the maximum parameters stored in the system memory since

the last time the maximum values were reset or since the system was put into

operation. (See Section 6.1.1.2. Maximums)

Minimums: (F3) This displays the minimum parameters stored in the system memory since

the last time the minimum values were reset or since the system was put into

operation. (See Section 6.1.1.3. Minimums)

TEXT VALUE DESCRIPTION

Display Version D-CVMk2-xxx Firmware version stored in the display screen.

S/N Display ************** Display screen serial number.

Language Spanish Language selected.

Measurement modules 01 Number of modules detected by the display screen.

Block NO Display screen is or is not password protected.

LDC OFF NO Display screen turns off with the lighting.

Light for ON Selected time over which backlighting will be on.

Date **/**/** Date congured in the module.

Time **:**:** Time congured in the module.

Temperature **.* Measurement module's internal temperature.

Days since reset *.** Days since the last reset was performed.

Days in operation *.** Total days the system has been in operation.

The following information appears on the screen:

It is important to refer to this screen, because it provides a summary of the display screen

conguration. Accordingly, it is not necessary to navigate through the conguration menus to

verify the system's conguration.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 151 152

Pas de commentaire

Circutor CVMk2 Series Manuel d'utilisateur Page 85